Quick Flashing Guide

Forum for announcements and discussion of beta firmware.
jaustinpage
Posts: 5
Joined: Mon Sep 23, 2013 10:59 pm

Quick Flashing Guide

Postby jaustinpage » Mon Sep 23, 2013 11:50 pm

Hi Guys! Thanks so much for an awesome charger. I was about to try and do some debugging, and was wondering what board I should specify when flashing firmware. Thanks!

Mark
Site Admin
Posts: 411
Joined: Sun Jul 28, 2013 6:47 am
Location: Brisbane, Australia

Re: Quick Flashing Guide

Postby Mark » Tue Sep 24, 2013 1:09 am

You will need to set yours as revision 7.

jaustinpage
Posts: 5
Joined: Mon Sep 23, 2013 10:59 pm

Re: Quick Flashing Guide

Postby jaustinpage » Tue Sep 24, 2013 1:30 am

Sorry, I meant which version of the arduino board should I be compiling this for? Arduino Pro328?

Mark
Site Admin
Posts: 411
Joined: Sun Jul 28, 2013 6:47 am
Location: Brisbane, Australia

Re: Quick Flashing Guide

Postby Mark » Tue Sep 24, 2013 1:35 am

Ah - sorry.

Yes, you want the Arduino Pro - the board has an ATmega328P running at 3.3V, 8MHz.

Paul.Allen
Site Admin
Posts: 98
Joined: Tue Aug 06, 2013 5:33 am
Location: Utah, United States

Re: Quick Flashing Guide

Postby Paul.Allen » Tue Sep 24, 2013 1:37 am

Arduino Pro Mini 3.3V 8Mhz ATmega328

Also I forgot the silk screen, but the pin closest to slot 2 is GND or Black if you are using an FTDI cable

jaustinpage
Posts: 5
Joined: Mon Sep 23, 2013 10:59 pm

Re: Quick Flashing Guide

Postby jaustinpage » Tue Sep 24, 2013 1:56 am

Perfect, I was 99% sure that was probably the right one, but I did not want to brick on the first night :-)

jaustinpage
Posts: 5
Joined: Mon Sep 23, 2013 10:59 pm

Re: Quick Flashing Guide

Postby jaustinpage » Tue Sep 24, 2013 4:10 am

And just so everyone else knows, on linux, you need to use Arduino 1.5 Beta (http://arduino.cc/en/Main/Software). (In my case, 1.5.4 worked, while fedora and kali linux distro-packaged versions did not).

Mark
Site Admin
Posts: 411
Joined: Sun Jul 28, 2013 6:47 am
Location: Brisbane, Australia

Re: Quick Flashing Guide

Postby Mark » Tue Sep 24, 2013 12:40 pm

Thanks for that. I've just posted an announcement with these details.


Return to “Beta Testers”

Who is online

Users browsing this forum: No registered users and 1 guest